User's Manual Part 2

APPENDIX B
SPECIFICATIONS
Antenna Specifications
Revised: 2 Jul 04 APX B-6 EST P/N AA107G
Model No: AA204Eg
Applications: Fixed base mounting
Antenna Type: 2.4 GHz ISM, Directional, DC Grounded, Parabolic Grid
Frequency: 2400-2485 MHz
Polarization: Vertical or Horizontal
Impedance: 50 ohms
Gain: 17 dBd (19 dBi) nominal
VSWR: < 1.5:1 nominal
Front to Back Ratio: >24 dB
Horizontal Beamwidth: 16 degrees @ ½ power
Vertical Beamwidth: 11 degrees @ ½ power
Antenna Material: Zinc plated cold rolled steel with polyester power
coat finish
Recommended Mounting
Hardware: Standard U-bolt steel mast clamp complete with
mounting hardware. Designed for masts of up to
2.5 in. O.D.
Antenna Connector: TNC-R Male with 36 in. pig-tail
Maximum Power Input: 10 Watts
Wind Survival: 100 mph
Wind Load: 16 mph
Antenna Envelope: 34 in. length by 17 in. width by 11 in. height
Weight: 3 lbs.
Model AA204Eg
Caution
To comply with the FCC exposure
compliance requirements, a
separation distance of at least 50 cm
must be maintained between the
antenna and all persons.
Use of the AA204Eg, directional antenna is limited to fixed point to point applications only. In accordance FCC
Section 15.247(b)iii, the operator or installer is responsible for ensuring the systems is used exclusively for
fixed, point-to-point applications.