User's Manual Part 2

CHAPTER 4
CONFIGURATION SETUP
Revised: 25 Jun 04 4-2 EST P/N AA107G
5. From the Model 195Eg Top menu select Setup. From the Select Mode of Operation pull down box , select AP Bridge and
push the Next button below the pull down box. You will now see the screen shown in Figure 2. Note: Throughout the
Configuration Manager are Help Screens that can accessed for further information on each item.
6. Select Yes if you want to use Dynamic Host Configuration Protocol (DHCP) client services. If you want to enter a static IP
address for the Model 195Eg, select No and press the Next button. Reference Figure 3.
Figure 2: Access Point Bridge Setup Screen
Figure 3: DHCP Client Setup Screen