User's Manual Part 2

APPENDIX B
SPECIFICATIONS
Antenna Specifications
Revised: 2 Jul 04 APX B-3 EST P/N AA107G
Model No: AA01S
Antenna Type: Omni-Directional, variable angle rubber duck
Applications: Direct mount
Frequency: 2400 to 2485 MHz
Polarization: Vertical
Impedance: 50 ohms
Gain: Unity
VSWR: < 1.5
Front to Back Ratio: n/a
Horizontal Beamwidth: n/a
Vertical Beamwidth: n/a
Antenna Material: Rubber duct whip.
Mounting Hardware: n/a
Antenna Connector: TNC-R Male
Antenna Envelope: 4.25 in. length by 1.75 in width
Weight: .08 lbs.
Model: AA20DMEg
Applications: Model 195Eg direct case mount
Antenna Type: Omni-Directional, Sleeve dipole
Frequency: 2400 to 2485 MHz
Polarization: Vertical
Impedance: 50 ohms
Gain: 5 dBi (3 dBd)
VSWR: < 2:1
Power: 10 W
Front To Back Ratio: n/a
Horizontal Beamwidth: n/a
Vertical Beamwidth: n/a
Antenna Material: Polyurethane Plastic Radome
Recommended Mounting Hardware: n/a
Antenna Connector: TNC-R Male
Flexibility: +/- 20 °
Antenna Envelope: 8.28 in. length by .54 in. width
Temperature: -40 to +70 C°
Weight: 33 grams
Model AA01S
Model AA20DMEg
Caution
Omni-directional antenna
should not be located within
20 cm of personnel.
Caution
Omni-directional antenna
should not be located within
20 cm of personnel.