User's Manual Part 1

CHAPTER 2
STARTING OUT
Revised: 12 AUG 04 2-3 EST P/N AA107G
7. Press the Enter key and you will be at the Configuration Menu login prompt 195Eg login. See Figure 3.
8. To enter the Model 195Eg Main Menu you will need to log into the system with a login name and password.
9. If this is not the first time configuration of the Model 195Eg, see your network systems administrator for the password.
10. At the 195Eg login prompt type admin for the login name and press the Enter key (<Enter>). The login name is defined at
the factory and is not changeable by the user. Note that all characters are lower case.
11. If this is the first time the Model 195Eg has been programmed or the Password was not changed from the factory default
values, the factory default password is also admin. Enter admin for the password and press the Enter key (<Enter>).
Note: All characters are lower case.
Figure 3: RS-232 Port Log-in Screen