User's Manual

APPENDIX B
SPECIFICATIONS
Antenna Specifications
Revised: 2 Jul 08 APX B-7 EST P/N AA107G
Model No: AA20E
Antenna Type: Omni Directional, DC Grounded
Applications: Fixed base
Frequency: 2400 to 2500 MHz
Polarization: Vertical
Impedance: 50 ohms
Gain: 6 dBd
VSWR: < 1.5
Front To Back Ratio: n/a
Horizontal Beamwidth: n/a
Vertical Beamwidth: 35 degrees @ ½ power
Antenna Material: Copper alloy radiator, UV inhibited fiberglass enclosed
Mounting Hardware: Aluminum bracket for mounting to 1 ¼ to 2 in. diameter mast
included.
Antenna Connector: N female reverse polarity.
Antenna Envelope: 20 in. length by 1.35 in. diameter
Weight: 2 lbs.
Only pre-made coax cables from the factory used in conjunction with either the AA20E omni-directional and AA203ES or
AA204ES directional antennas meet all FCC Section 15.247(b) EIRP maximum power requirements. See Chapter 8 for
details on maximum cable lengths.
Model AA20E
Mounting
Bracket
Caution
To comply with the FCC
exposure compliance
requirements, a separation
distance of at least 20 cm
must be maintained between
the antenna and all persons