User's Manual

CHAPTER 5
EXAMPLE CONFIGURATIONS
Revised: 23 Jan 08 5-26 EST P/N AA107G
2. Select Yes if you would like to use DHCP services on either the wireless or ethernet connections. Enter the SSID for you
802.11g network. The SSID is the unique identification for your wireless network and all 802.11g devices that share a wireless
network MUST have the same SSID code. This identification code is case sensitive and must NOT contain spaces. Select the
encryption level for the wireless network to match the level of the Access Point canopy. Reference Figure 45.
3. Enter the WEP key values for your application that will be used by all devices on the wireless network. Reference Figure 46.
4. Refer to the IP address in Table 1 and enter the wireless IP Address and IP Netmask for the Station Router. Reference Figure
47.
Figure 46:WEP Key Entry
Figure 47:Wireless IP Settings