User's Manual

CHAPTER 3
STARTING OUT
Revised: 21 Mar 08 3-10 EST P/N AA107G
13. Select Ethernet Only and press the Enter key. In the initial configuration it is best not to use the ESTeem as a DHCP client.
Select OFF on the DHCP client services on the next screen and continue the process selecting Next and Posting the information.
Program the basic operating parameters such as assigning the Model 195Eg an IP Address, IP Net Mask, Gateway IP Address,
Domain Name, or DNS IP Address.
Note: Next to all items in the configuration menu are Help screens that define all the settings and provide assistance on
configuring the Model 195Eg.
14. After the basic parameters have been entered into the Model 195Eg you will need to commit the changes to the Model 195Eg
(Figure 13). The changes will be saved to flash memory. You can use programming features in the ESTeem Web
Configuration Manager to configure the unit for your application. Proceed to Chapter 4.
Figure 13: Commit Changes Screen