User's Manual

CHAPTER 6
SERIAL APPLICATIONS
Revised: 23 Jan 08 6-3 EST P/N AA107G
Mode of Operation
There are two distinct modes of operation for the serial port in the 195Eg. The Redirector mode will provide two-way serial
communication between two or more serial devices, while the Terminal Server mode will allow serial communication to a specific
remote site by connecting through telnet or SSH. Select one of the following modes of operation:
Full Redirector Mode - This mode allows bi-directional RS-232 data communication with another ESTeem. The RS-232 data
transmission will appear transparent to the connected devices as if a serial cable is connected between the two ports. This mode
will also be used in a multi-point serial network were all serial devices will need bi-directional communication (Figure 4).