User's Manual Part 3

CHAPTER 8
ANTENNA SETUPS
Revised: 11 Aug 08 8-4 EST P/N AA107D
3. Inventory the AA195PM Hardware bag for all the components listed in Figure 2.
4. Assemble the two Pole Mounting Brackets with the included U-bolts, hardware and Pole Mount Clamps. Reference Figure 3.
5. Place the four supplied 10-24 x 1” Phillips Pan Head screws through the mounting holes of the Heat Shield and attach to the to
the top of the ESTeem 195E (Figure 4).
Figure 3: Pole Mount Assembly
Figure 4: Heat Shield Attachment