User's Manual Part 2

CHAPTER 6
SERIAL APPLICATIONS
Revised: 30 Jun 08 6-2 EST P/N AA107D
SERIAL CONFIGURATION
Configuration of the serial port is completed during the standard setup of the 195Ed. After completion of the Repeater Peer
configuration screen, the Serial Port Setup screen (Figure 3) will be displayed. Each section in the Serial Port Setup screen is
described in detail with the following:
Enable the RS-232 Data Port
Enabling the serial data port allows the modem to send RS-232 data over the broadband wireless connection established with the
ESTeem repeater peers. The modem can be configured in a point-to-point or point-to-multipoint system. Select Yes if you wish to
enable the serial data port.
Figure 3: Serial Configuration Screen