User's Manual Part 2

CHAPTER 5
EXAMPLE CONFIGURATIONS
Revised: 30 Jun 08 5-6 EST P/N AA107D
6. Enter the default route (Gateway) address for the network. This AP Router 195Ed will use the Network Router for address
resolution (Figure 3). Enter the IP address for the Network Router and any DNS server information. If you are not connecting
the Model 195Ed to the Internet, leave blank and press the Next button. Figure 9.
7. Select Yes if you will be using security for client access to your wireless network (recommened).
NOTE: The setting of this security level is ONLY for client access to the Model 195Ed. The security of the Bridge
communication between the Model 195Ed’s is separate and will be configured during the repeater configuration.
Enter the SSID for your network. The SSID is the unique identification for your wireless network and all 195Ed that share a
wireless network MUST have the same SSID code. This identification code is case sensitive and must NOT contain spaces.
Reference Figure 10.
Figure 9: Wireless Security Level Settings
Figure 10: WEP Key Entry