User's Manual

APPENDIX B
SPECIFICATIONS
Antenna Specifications
Revised: 27 Jan 12 APX B-3 EST P/N AA107A
Model: AA20DMEa
Applications: Model 195Ea direct case mount
Antenna Type: Omni-Directional, Sleeve dipole
Frequency: 5.735 to 5.835 GHz
Polarization: Vertical
Impedance: 50 ohms
Gain: 4.5 dBi (2.5 dBd)
VSWR: < 1.5:1
Power: 10 W
Front To Back Ratio: n/a
Horizontal Beamwidth: n/a
Vertical Beamwidth: n/a
Antenna Material: Polyurethane Plastic Radome
Recommended Mounting Hardware: n/a
Antenna Connector: TNC-R Male
Flexibility: +/- 20 
Antenna Envelope: 7.36 in. length by .51 in. width
Temperature: -20 to +65 C
Weight: 28.4 grams
Model No: AA20Ea
Antenna Type: Omni Directional, DC Grounded
Applications: Fixed base
Frequency: 5.725-5.825 GHz
Polarization: Vertical
Impedance: 50 ohms
Gain: 6 dBi (8 dBd)
VSWR: 1.5:1 Typical
Vertical Beamwidth: 6 degrees @ ½ power
Recommended Mounting Hardware: Pole Mounting Bracket, Supplied
Antenna Connector: TNC male reverse polarity with
18 in. pigtail and weatherproof boot
Maximum Power Input: 25 Watts
Wind Survival: 125 mph
Antenna Envelope: 20.2 in. L x 1.25 in.
Equivalent Flat Plate Area: .06 sq. ft
Lateral Thrust at Rated Wind: 5.2 lbs feet
Radome: White UV resistant fiberglass
Weight: 0.5 lbs.
AA20DMEa
AA20Ea
Caution
To comply with the FCC
exposure compliance
requirements, a separation
distance of at least ~113
cm must be maintained
between the antenna and
all persons.