User's Manual
Table Of Contents
- 195Ea Chapter 0 - Front Cover 195Ea
- 195Ea Chapter 0 - Table of Contents
- 195Ea Chapter 1 - Introduction
- 195Ea Chapter 2 - Starting Out
- 195Ea Chapter 3 - Example Applications
- 195Ea Chapter 4 - Utilities and Features
- 195Ea Chapter 5 - Web Configuration Manager
- 195Ea Chapter 6 - Serial Configuration and Applications
- 195Ea Chapter 7 - Repeating and Mesh Networking
- 195Ea Chapter 8 - Antenna Setup
- 195Ea Apx A - FCC Information
- 195Ea Apx B - Specifications
- 195Ea Apx C - Interface Ports
- 195Ea Apx D - Radio Configuration
- 195Ea Apx E - Security
- 195Ea Apx F - Troubleshooting
CHAPTER 4
UTILITIES & FEATURES
Revised: 6 Sep 11 4-14 EST P/N AA107A
Multicast Encapsulation
To enable Multicast Encapsulation, select Advanced>Wireless LAN Settings>wlan0 device and press the Next
Button (Figure 18). Select wlan0_EncapsulateMulitcast to either Multicast (for all Multicast including Broadcast) or
Broadcast (Broadcast only). Press the Accept Button and then Commit and Reboot.
Enabling IGMP Snooping
To enable the ESTeem 195Ea for IGMP Snooping, select Advanced>Bridge Variables and press the Next Button
(Figure 19). Select IGMP Snoop to YES, press the Accept Button and then Commit and Reboot.
Figure 18: Multicast Enable
Figure 19: Repeater Peer with IGMP Enabled