User's Manual Part 2

APPENDIX D
TROUBLESHOOTING
Revised: 26 Sep 13 APX D-6 EST P/N AA107-195CM
EtherStation
How do I access the Model 195C/M web page in EtherStation Mode? The Model 195C/M does not have an active web browser
when configured in EtherStation mode. You must access the ESTeem with the ESTeem Discovery Program or through the RS-
232 port after configuration in this mode. To monitor the link status, you can use the EtherStation Status program.
What IP address do I configure the ESTeem in EtherStation mode? – The Model 195C/M will not have an IP address in
EtherStation mode.
I can not link my device into the wireless network – Verify that the MAC address of the device is exactly the same as configured
in the Model 195C/M. The MAC address must have colons between the values.
Can I connect my Model 195C/M in EtherStation mode to a HUB or Ethernet Switch? – No. The modem must be connected
directly to the Ethernet device for which it is programmed. In EtherStation mode the Model 195C/M can only service ONE
Ethernet device.