User's Manual Part 1
Table Of Contents
- Chapter 0 - Front Cover 195CM.doc
- Chapter 0 - Table of Contents 195CM.doc
- CHAPTER 1 – Introduction
- Before You Begin
- Model 195C/M Overview
- Three Configuration Phases
- Model 195C/M Hardware Description
- Modes of Operation Description and Examples
- Programming Examples
- CHAPTER 5 – Web Configuration
- Logging Into Web Configuration Manager
- Web Configuration Manager
- CHAPTER 6 – Serial Configuration and Applications
- Using USB Programming Port
- Using RS-232 Data Port
- ESTeem Mesh Network
- Rapid Spanning Tree Protocol (RSTP)
- Spanning Tree Protocols (STP)
- Redundant Backup
- CHAPTER 8 – Antenna Setups
- Antenna and Cable Configurations
- Weatherproofing Coaxial Cable Connections
- APPENDIX A – FCC Information
- APPENDIX B – Interface Ports
- APPENDIX C – Radio Configuration
- APPENDIX E – Troubleshooting
- APPENDIX F – 195C/M Specifications
- Before You Begin
- CHAPTER 1 – Introduction
- Chapter 1 - Introduction 195CM.doc
- BEFORE YOU BEGIN
- MODEL 195C/M OVERVIEW
- The ESTeem Model 195C/M and 195C/M are wireless modem transceivers that can be used to build many types of Wireless Local Area Networks (WLAN). The ESTeem 195C/M series have both and Ethernet interface and an RS-232 serial port for legacy device networks. The Model 195C/M is a very sophisticated networking device that can be configured for multiple modes of operation depending upon the needs of the wireless and wired LAN system. The following configuration modes are provided as an overview of the basic network types, as all possible network configurations can not be listed. For further help in selecting the correct network type, please refer to Chapter 4 of this User’s Manual or call Customer Support at 509-735-9092.
- CONFIGURATION MODES
- Chapter 2 - Starting Out 195CM.doc
- Chapter 3 - Example Applications 195CM.doc
- Chapter 4 - Utilities and Features 195CM.doc
- ESTeem Network Configuration Utility (ENC)
- Note: The ESTeem Resource Disk is a stand-alone copy of the ESTeem Web site (Figure 2). Navigation of the Resource Disk is as simple as using your web browser. All technical documentation, User’s Manuals and the ESTeem Utility Program are available on the disk.
- Note: If the page does not auto load, open your web browser and set your address line to D:\index.html (Where D: is the drive letter for your CD-ROM drive).
- Note: This program is saved in a compressed file format.
- Note: The SSID, Mode of Operation and Modem ID will be adjusted through the ENC Utility or the Web Configuration Manager...
- Note: The ESTeem Resource Disk is a stand-alone copy of the ESTeem Web site (Figure 1). Navigation of the Resource Disk is as simple as using your web browser. All technical documentation, User’s Manuals and the ESTeem Utility Program are available on the disk.
- Note: If the page does not auto load, open your web browser and set your address line to D:\index.html (Where D: is the drive letter for your CD-ROM drive).
- Note: This program is saved in a compressed file format. Microsoft Windows XP® will open the file directly, but other operating systems will require a common compression program such as WinZip available for download at http://www.winzip.com
- Note: This Utility will only operate with an ESTeem Model 195C/M in EtherStation mode.
- Chapter 5 - Serial Configuration and Applications 195CM.doc
- Chapter 6 - Repeating and Mesh Networking 195CM.doc
CHAPTER 1
INTRODUCTION
BEFORE YOU BEGIN
Thank you and congratulations on your purchase of the ESTeem Model
195C/M Wireless Ethernet Radio Modem! This manual was written to help
both the first time and advanced user of the 195C/M to configure the
wireless modem for your application. If this is your first time configuring
the 195C/M and you would like to get going as soon as possible, we
recommend using the ESTeem Resource CD provided with the modem. The
Resource CD will provide the software utilities and guide you through the
configuration of the wireless modem for your application.
Figure 1: ESTeem Model 195C/M Series
The ESTeem 195C/M wireless Ethernet modems are sophisticated networking devices. To keep the manual usably short,
many of the application descriptions and programming details assume the user has a good working knowledge of the following
network concepts:
Throughout this User’s Manual are
“Technical Tips” in boxes like this that
have been added to help answer the
most commonly asked questions.
• General Ethernet networking and the configuration of LAN topologies
• Common Ethernet terminology and acronyms
• TCP/IP network protocol structure and how to configure TCP/IP networks
and subnets
• How to identify and set the TCP/IP address on your computer
• Have administrator privileges to the computer and network you are configuring
• If using routing protocols, you must be able to identify and configure the network routers, gateways and firewalls
• You must be familiar with using web browser software such as Internet Explorer, Chrome or Firefox
If you are unfamiliar with any of the above networking concepts, you may need to contact your network administrator for
assistance.
MODEL 195C/M OVERVIEW
Figure 2: Access Point Bridge Diagram
The ESTeem Model 195C/M and 195C/M are
wireless modem transceivers that can be used to
build many types of Wireless Local Area
Networks (WLAN). The ESTeem 195C/M series
have both and Ethernet interface and an RS-232
serial port for legacy device networks. The Model
195C/M is a very sophisticated networking device
that can be configured for multiple modes of
operation depending upon the needs of the
wireless and wired LAN system. The following
configuration modes are provided as an overview
of the basic network types, as all possible network
configurations can not be listed. For further help
in selecting the correct network type, please refer
to Chapter 4 of this User’s Manual or call
Customer Support at 509-735-9092.
Revised: 1 Oct 13 1-1 EST P/N AA107-195CM