User Manual

APPENDIX B
SPECIFICATIONS
Model 192E Antennas
Revised: 15 Oct 01 APX B-3
Model No: AA202S
Antenna Type: Directional, 15 element yagi in sealed UV
stable radome
Applications: Fixed base.
Frequency: 2400 to 2500 MHz
Polarization: Linear
Impedance: 50 ohms
Gain: 13.9 dBd
VSWR: < 1.5
Front To Back Ratio: 18 dB
Horizontal Beamwidth: 34 degrees
Vertical Beamwidth: 30 degrees
Antenna Material: Stainless hardware with one piece copper
radiating element. Advanced microwave
substrate. All other hardware anodized
metal.
Mounting Hardware: Stainless steel U bolts for mounting to 1.5
in. to 2.2 in. diameter pipe.
Antenna Connector: TNC-R Female on Pigtail
Maximum Power Input: 50 Watts
Antenna Envelope: 26 in. length by 4.0 in. height by 1.5 in. width
Windload (RWV): 125 mph
Wind Load ½ in. Ice: 100 mph
Wind Surface Area: 0.4 ft
2
Weight: 1.25 lbs.
Model AA202S
Caution
To comply with the FCC
exposure compliance
requirements, a separation
distance of at least 19 cm
must be maintained between
the antenna and all persons.