User Manual

APPENDIX B
SPECIFICATIONS
Model 192E Antennas
Revised: 15 Oct 01 APX B-2
Model No: AA01S
Antenna Type: Omni-Directional, right angle rubber duck, ½ wave
Applications: Back of ESTeem Model 192S mount.
Frequency: 2400 to 2485 MHz
Polarization: Vertical
Impedance: 50 ohms
Gain: 2 dBd
VSWR: < 1.5
Front To Back Ratio: n/a
Horizontal Beamwidth: n/a
Vertical Beamwidth: n/a
Antenna Material: Rubber duct whip.
Mounting Hardware: n/a
Antenna Connector: TNC-R Male
Antenna Envelope: 4 in. length by 1.5 in width
Weight: .08 lbs.
Model No: AA20S
Antenna Type: Omni Directional, 5/8 Wave over 5/8 Wave over ¼ Wave.
Applications: Fixed base or mobile mount.
Frequency: 2400 to 2485 MHz
Polarization: Vertical
Impedance: 50 ohms
Gain: 5 dBd
VSWR: < 1.5
Front To Back Ratio: n/a
Horizontal Beamwidth: n/a
Vertical Beamwidth: n/a
Antenna Material: Stainless steel whip. All other hardware anodized metal.
Mounting Hardware: Stainless steel clamps for mounting to ¾ in. to 1½ in. pipe
with right angle mount of direct panel mount..
Antenna Connector: TCN-R Female.
Antenna Envelope: 9 in. length by 3.5 in. width
Weight: .4 lbs.
3.5 in. Dia.
Right Angle
Mounting
Bracket
Stanless
Steel
Clamps
9 in.
Model AA20S
4 in.
1.5 in.
Model AA01S
Caution
To comply with the FCC
exposure compliance
requirements, a separation
distance of at least 7 cm must
be maintained between the
antenna and all persons.