User's Manual

APPENDIX D
SOFTWARECOMMANDS
Definitions
Listed below in alphabetical order are the definitions of the ESTeem software commands.
Revised: 27 Mar 01
APX D-9
TYPSyste (on/off)
This command enables the System and Error Message
Commands.
ON: Enabled.
OFF: Disabled.
Factory default = ON.
VERSION
This command will display the current software version
being used by the ESTeem.
XHflow (on/off)
This command enables hardware flow control.
ON: Enabled.
OFF: Disabled.
Factory default = OFF.
XSflow (on/off)
This command enables software flow control.
ON: Enabled.
OFF: Disabled.
Factory default = ON.