User's Manual

CHAPTER 1
STARTING OUT
Revised: 27 Mar 01 1-2
BEFORE YOU START
Congratulations on your purchase of the ESTeem
Wireless Modem! This section of the manual will
describe the basic functioning and programming of the
ESTeem to get your wireless network up as soon as
possible. It is recommended that any first time user of
the ESTeem and those that are unfamiliar with its
operation complete all steps in this section before
proceeding.
Take a few minutes to inventory your equipment before
you proceed. Report any missing or damaged items to
Customer Support as soon as possible. We at Electronic
Systems Technology, Inc. (EST) are constantly trying to
improve our products and support system so if you have
any comments or suggestions on improvement of this
manual, please contact us at [phone].
The completion of this section requires loading the
ESTeem Utility program on your computer. The
following section will describe the installation and use of
this valuable utility program.
ESTEEM UTILITY
The ESTeem Utility is designed to assist the ESTeem
user in programming and troubleshooting. The Utility
covers basic operation, programming, PLC applications,
and diagnostics of the ESTeem. The ESTeem Utility
Program is designed to operate with Windows 95®,
Windows 98® and Windows NT® 4.0 and greater.
Installing ESTeem Utility Software
The ESTeem Utility Software is used for the setup and
programming of the ESTeem.
1. Place the ESTeem Utility CD in your CD-ROM
drive. The CD will auto load the ESTeem Utility
Setup window (Figure 2). If the window is not
displayed, proceed to step 2, otherwise proceed to
step 3.
2. If you have Autorun disabled for you CD-ROM
drive, Press the Start button on your Window
desktop and select Run. Press the Browse button and
select your CD-ROM drive from the list. Double-
click on the "CDLoader.exe" icon and press the OK
button. Your computer will now display the
ESTeem Utility Setup window (Figure 2).
3. The ESTeem Utility Setup window will allow you to
install the ESTeem Utility Program, view the on-line
documentation and install the Adobe Acrobat®
Reader. The Acrobat Reader is required to view the
documentation. To install the ESTeem Utility
program press the Install ESTeem Utility button on
the menu and follow the on-screen instructions to
install the program.
Running The Program
1. Select the ESTeem Utility Icon on Start>Programs
menu. Figure 3 shows an example of the Main
Utility Menu.
Figure 2: ESTeem Utility Setup Menu
RS-232C Interface Cable
(EST P/N AA061)
12 VDC Power Supply
(EST P/N AA174)
2 Pin Molex
Connector
ESTeem Model 192
Front View
ESTeem Model 192 Utility
Software Windows Version
Computer Running
Windows 95/98/NT
TNC Male
Connector
Magnetic Mount Antenna
(Consult Appendix B for
antenna type)
Figure 1: Installation Diagram