User's Manual

APPENDIX C
SPECIFCATIONS
ESTeem System Error Message Table
Revised: 27 Mar 01
APX C-3
Listed below are the ESTeem System Error Messages and their definitions. To receive these messages, TYPSYSTEM must
be ON (See APPENDIX D, DEFINITIONS). All System Status Messages have a bell (O7H or CTRL G) preceding the
message except when Messform is ON. If Messform = OFF Line A will be displayed. If Messform = ON Line B will be
displayed.
1. A "NOVRAM FAILED"
B SEO1
If this response is received after a save, there is a
hardware problem with the ESTeem's NOVRAM
Circuitry.
2. A "ROM FAILED"
B SEO2
If this response is received after a save, there is a
hardware problem with the ESTeem's ROM
Circuitry.