User's Manual

APPENDIX A
FCC LICENSING
Revised: 27 Mar 01
APX A-2
INFORMATION TO USERS
WARNING: This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This
equipment generated, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the
interference at his own expense.
To insure compliance to FCC non-
interference regulations, peripherals attached
to this modem require shielded I/O cables.
If this equipment does cause interference to
radio or television, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
1. Re-orient the radio/TV receiving antenna.
2. Re-orient the modem antenna.
3. Relocate the modem with respect to the radio/TV
receiving antenna.
4. Plug the power supply for the modem into a different
outlet so that the modem and radio/TV receiver are on
different branch circuits.
5. Verify that the modem chassis is connected to an earth
ground.
6. Attach a split bead (FAIR-RITE PN 2643164251) to
the RS-232 cable.
If necessary, the user should consult the dealer or an
experienced radio/TV technician for additional suggestions.
The user may find the following booklet prepared by the
FCC helpful.
"How to Identify and Resolve Radio-TV Interference
Problems"
This booklet is available from the U.S. Government Printing
Office, Washington, D.C. 20402 - Stock No. 004-000-
00245-4. Application forms for the license are available
from the nearest office of the FCC.
Electronic Systems Technology maintains a list of
consultants that provide professional services at a
reasonable cost to assists the users in licensing.
Other Information
Model 192C
25 KHz Channel Spacing, 19,200 bps
FCC Type Acceptance No: ENPESTEEM192
Emissions Designator: 17K6F1D
12.5 KHz Channel Spacing, 9,600 bps
FCC Type Acceptance No: ENPESTEEM192A
Emissions Designator: 10K8F1D
12.5 KHz Channel Spacing, 19,200 bps
Industry Canada Type Acceptance No: 2163 195 214A
Emissions Designator: 10K0F1D
Model 192F
25 KHz Channel Spacing, 19,200 bps
Industry Canada Type Acceptance No: 2163 195 214A
Emissions Designator: 17K6F1D
12.5 KHz Channel Spacing, 9,600 bps
Industry Canada Type Acceptance No: 2163 195 214A
Emissions Designator: 10K8F1D
25 KHz Channel Spacing, 19,200 bps
Malaysia Telecom No: RADL 60A 1097 S
Emissions Designator: 17K6F1D
Model 192M
25 kHz Channel Spacing, 19,200 bps
U.S.A. Type Acceptance: ENPESTEEM192M
Emission Designator: 17K6F1D
12.5 kHz Channel Spacing, 9,600 bps
U.S.A. Type Acceptance: ENPESTEEM192M
Emission Designator: 10K8F1D
25 kHz Channel Spacing, 19,200 bps
Canada: 2163195385A
Emission Designator: 17K6F1D
12.5 kHz Channel Spacing, 9,600 bps
Canada: 2163195385A
Emission Designator: 10K8F1D