User's Manual

CHAPTER 6
ANTENNAS
Revised: 27 Mar 01
6-5
Models 192C and 192F Typical Outdoor
Antenna Installation Diagram
N Male
Connector
N Male
Connector
TNC Male
Connector
2 Pin Molex
Connector
User’s
Device
RG-8 Coax
(EST Part No. AA234
RS-232C
Setup
Switches
RS-232C, 422, & 485
Interface Connector
NOTES
1. Use coax cable runs as short as practical to
minimize cable losses.
2. Vapor wrap all external antenna coax
connections with vinyl wrap (EST Part No. AA241)
and apply Scotchkote Electrical Coating (EST Part
No. AA242).
3. Contact EST for recommendations regarding
antenna mounting hardware and installation tips.
4. Ground antenna structure, base and lightning
arrestor.
ANTENNA
RECOMMENDATIONS
1. Omni-Directional
(EST P/N AA20M or
ASP682).
2. Directional (EST P/N
AA202M).
Directional
Antenna
Omni-Directional
Antenna
UHF Male
Connector
for AA235
or AA238
ANTENNA FEEDLINE
RECOMMENDATIONS
1. Up to 50 ft. use RG-8
Coax (EST P/N AA235)
or AA237.
2. Over 50 ft. use 1/2”
heliax (EST P/N AA236)
or AA238.
N Male
Connector
for AA236
or AA237
12 VDC Power Supply
(
EST Part No. AA174)
RS-232C,422, or 485
Interface Cable
(EST Part No. AA06,
AA061, AA07, or
custom depending on
device)
Lightning Arrestor
(EST Part No. AA162)