User's Manual

Edge 900
User’s Manual
Revised: 19 Jan 2017 4 of 9
Step 4 – Encryption and Network Identification
The unique identification for an Edge 900 network is the AES-256 passphrase (Figure 7). A unique pass phrase must be
entered to finish the configuration of the radio. The pass phrase must be between 4 and 64 character long and MUST be
identical on all Edge 900 radios in the same network. Enter the network pass phrase and press the “Update Radio Config”
button to program the radio for operation.
Software Commands
Listed below in alphabetical order are the definitions of the ESTeem Edge 900 software commands. All software commands
are entered lowercase.
? or help
help Displays the modem information and sub help menus.
help all Displays all commands switches and arguments.
help radio Displays radio commands switches and arguments.
help interface Displays interface commands switches and arguments.
help setup Displays setup commands switches and arguments.
help system Displays system commands switches and arguments.
cert
This command will display the FCC ID and model number of the amplifier.
Figure 7: Step 4 – Encryption and Network Identification