User's Manual Part 3

To move an Temperature (Y) Reference Line:
1) Position the mouse pointer over the desired reference line.
2) Double-click the reference line and the Add Temperature (Y) Reference line
dialog box appears.
3) Edit the reference line settings and click the OK command to accept the new
settings or Cancel to quit the command.
5.5.9.3. Set Time (X) Scale
This command controls the scale of the Time (X) axis on the Data Graph.
This is available when in Engineer Mode.
To select a Time (X) scale:
1) On the Profile menu, click Set Time (X) Scale.
2) Select the scale Type and Distance units.
3) Click the OK command button to accept the changes, or Cancel to discard any
changes.
Relative Time Scale
Distance Scale