User's Manual Part 3

2) Select your process specification. Select a Paste from the database or previously
created Target 10 Specification. If your Paste does not appear in the database
list click the New command button to create a new one. Refer to topic
Software>Menus>Process>Create new Paste for more information.
When the user selects a paste from the database, they can use the radio
buttons below the drop down box to filter and display only the user created
pastes from paste database.
3) Choose the Profile Type (Ramp-Soak-Spike or Ramp-to-Spike).
Ramp-Soak-Spike profile types are the only type allowed to be edited.
Once a process is selected, the specifications are displayed on the graph. The
software also allows paste specification data to be viewed in a table view by
clicking the Table command button.