User's Manual Part 3

5.5.8.1. Set Process Information
This command allows the user to set a process paste and display it on the Data Graph so
the user can visually see how the data run profile lines up with the process specification.
This is available when in Engineer Mode.
To set a process:
When setting a process, this data will be applied to the currently selected data
run only. Existing defined machine models may not accurately reflect your
machine and are used as a starting template.
1) On the Process-Paste menu, click Set Process.
If a setting is already selected for a data run, the software prompts the user to
decide if they wish to modify the current data run. Click the Yes command
button to continue or No to quit the command.