User's Manual Part 3

2) Select your machine from the Machine drop down list. If it does not appear in the
list click the New command button to create a new one. Refer to topic
Software>Menus>Machine>Create new Machine for more information.
3) Set the machine conveyor speed. The software uses this value to calculate the
Time (X) Scale values when Distance units are displayed. This number is also
used as the actual conveyor speed when prediction data lines are added. Refer to
topic Software>Menus>Tools>Prediction Tool for more information.
To properly display a machine model on the Data Graph, a conveyor speed
must be set. If you do not know what the conveyor speed is, the software
allows you to estimate it based on the machine information and the data run
profile. Refer to topic Software>Menus>Machine>Estimate Conveyor
Speed for more information.
4) Set the machine temperature units.