User's Manual Part 3

5.5.6.1. Set Machine Information
This command allows the user to set machine information and display it on the Data
Graph so the user can visually see how the data run profile lines up with the machine.
This is available when in Engineer Mode.
To set machine information:
When setting machine information, this data will be applied to the currently
selected data run only. Existing defined machine models may not accurately
reflect your machine and are used as a starting template.
1) On the Machine-Oven menu, click Set Machine Information.
If a setting is already selected for a data run, the software prompts the user to
decide if they wish to modify the current data run. Click the Yes command
button to continue or No to quit the command.