User's Manual Part 2

5.5.5.1. Select Instrument
The Select Instrument command allows the user to select an available M.O.L.E. Profiler
to make active so it can interface with the software.
This is available in both Engineer & Verify Modes.
To select an instrument:
1) Connect the M.O.L.E. Profiler to the computer. Refer to
Basics>Setup>Communications Setup for more information.
2) On the M.O.L.E. menu, click the Select Instrument command.
3) Select the desired instrument from the dialog box. If there are none displayed, click
the Scan for Instruments command button to detect all available instruments.