User's Manual Part 2

5) Click the Next command button.
6) Select the desired instrument from the dialog box to make active. If a M.O.L.E.
Profiler has already been selected during a different process, the software
automatically selects the M.O.L.E. Profiler connected to the COM port previously
used.
If the software does not detect a M.O.L.E. Profiler, using the communication
cable connect it to the computer and click the Scan for Instruments
command button to search again. M.O.L.E.® MAP software allows multiple
instruments to be connected to a computer at one time. Selecting the Scan for
Instruments command button will detect all instruments and display them in
the dialog box. If no instrument is detected the software displays all of the
Demonstration thermal profilers to select from.