User's Manual Part 2

10) When finished, click the OK command button to accept or Cancel to return without
making any changes.
11) Click the Next command button.
12) Select your process specification. Select a Paste from the database or previously
created Target 10 Specification. If your Paste does not appear in the database
list click the New command button to create a new one. Refer to topic
Software>Menus>Process>Create new Paste for more information.
13) Choose the Profile Type (Ramp-Soak-Spike or Ramp-to-Spike).
Ramp-Soak-Spike profile types are the only type allowed to be edited.
When the user selects a paste from the database, they can use the radio
buttons below the drop down box to filter and display only the user created
pastes from paste database.