User's Manual Part 1

10) Click the Next command button.
If no value is specified for the conveyor speed or the default machine
temperature values, the software will remind the user to set them.
11) Enter the assembly information such as part number, board size, sensor locations
and a product image.
When using a SuperM.O.L.E.®
Gold Profiler, if fewer than six sensors used, it
is important that the unused channels are turned OFF or shorting plug(s) are
used for each unused channel. Refer to topic Service>SuperM.O.L.E.
Gold>Constructing a Thermocouple for instructions on how to make a
shorting plug.