User's Manual Part 1

The Transceiver can either be connected directly to a computer USB port or a
USB extension cable. Using an USB extension cable can be a simple way to
get the Transceiver to a better reception area without moving the PC. No
matter which method is used, keep wires and other metal objects away from
the Transceiver.
Good
Poor
2) After the Transceiver is connected to a computer, it needs to be detected by the
software to properly communicate.
3) Start the software program by either double-clicking the M.O.L.E.® MAP software
icon or selecting it from the ECD program sub-menu.
Confirm the M.O.L.E. Profiler power is on. If it is not This can be done by
pressing the On/Off button or by connecting it to the PC USB port.