User's Manual Part 1

3) Start the software program by either double-clicking the M.O.L.E.® MAP software
icon or selecting it from the ECD program sub-menu.
4) On the M.O.L.E. menu, click the Select Instrument command.
5) Select the desired instrument from the dialog box. If there are none displayed, click
the Scan for Instruments command button to detect all available instruments.
If the software does not detect a M.O.L.E. Profiler, using the communication
cable connect it to the computer and click the Scan for Instruments
command button to search again. M.O.L.E.® MAP software allows multiple
instruments to be connected to a computer at one time. Selecting the Scan for
Instruments command button will detect all instruments and display them in
the dialog box. If no instrument is detected the software displays all of the
Demonstration thermal profilers to select from.
6) Click the OK command button to accept or Cancel to quit the command.