User's Manual Part 1

3.2. SuperM.O.L.E.® Gold 2
The SuperM.O.L.E.® Gold 2 continues the legacy of the original SuperM.O.L.E.® Gold.
With all the power of a MEGAM.O.L.E.® 20. It retains the same form factor, thermocouple
connector type, and channel count (6) in addition to individual channel LEDs.
• RED indicates channel is “active”, as configured in the software.
• GREEN indicates that thermocouple is plugged in and a complete circuit.
Features/functions:
• Thermocouple/Inputs:This is where Type “K” Thermocouples are connected.
• Data/Charging Port: This port is located on the backside of the Profiler. This is
used to transfer data through the USB computer Interface cable to the computer
and charge the internal Power Pack.
• RF Antenna Connector: This is where the Optional RF antenna is connected.
• Buttons: ON/OFF, Record & OK.