User's Manual Part 1

For protection of the M.O.L.E. Profiler and components, observe the following:
• NEVER permit the M.O.L.E. Profiler or the battery to exceed the maximum
specified internal temperature as permanent damage may result. (Refer to
Appendix A: Specifications).
• NEVER expose the M.O.L.E. Profiler or battery to temperatures below the
specified minimum for extended time periods. This may damage the rechargeable
battery.
• NEVER connect the M.O.L.E. Profiler input channels to objects at elevated
electrical potentials.
• NEVER operate the M.O.L.E. Profiler in flammable or explosive atmospheres.
Such usage constitutes a fire or explosion risk.
• NEVER immerse the M.O.L.E. Profiler in liquids.
• NEVER subject the M.O.L.E. Profiler and components to sharp impacts.
• NEVER excessively stress the computer Interface cable.
• NEVER expose the M.O.L.E. Profiler and components to corrosive environments.
• NEVER make any changes or modifications to the Wireless RF components.
Such changes are not expressly approved by ECD and could void the user's
authority to operate the equipment.
When removing M.O.L.E. Profiler from any temperature environment, be
careful of extreme temperatures and use protective gloves.