User's Manual Part 3

♦319♦ MEGAM.O.L.E.® Help System Guide
5.5.9.1. Set Temperature (Y) Scale
This command controls the scale of the Temperature (Y) axis on the Data Graph.
To use the scaling command:
1) On the Profile menu, click Set Temperature (Y) Scale. This dialog box identifies
the current settings of the displayed units and the maximum and minimum
values.
2) Select between Auto or Manual mode. In Auto mode, the software selects the
scale of the Y-Axis to ensure all Data Point values and the highest Zone
temperature settings are visible in the Data Graph. In Manual mode, the range of
values must be manually set.
3) Click the OK command button to use the settings or Cancel to quit the
command.
This command can also be accessed by double-clicking the scale on the Data
Graph.