User's Manual Part 3

MEGAM.O.L.E.® Help System Guide ♦308♦
5.5.8.1. Set Process
This command allows the user to set a process paste and display it on the Data Graph
so the user can visually see how the data run profile lines up with the process
specification.
When setting a process, this data will be applied to the currently selected data
run only. Existing defined machine models may not accurately reflect your
machine and are used as a starting template.
To set a process:
1) On the Process-Paste menu, click Set Process.
If a setting is already selected for a data run, the software will prompt the user
to decide if they wish to modify the current data run. Click the Yes command
button to continue or No to quit the command.
2) Select your process specification. The user can select a Paste from the database
or a pre-defined Target 10 file. If the desired paste does not appear in the
database list click the New command button to create a new one. Refer to topic
Software>Menus>Process>Create new Paste for more information.
When a paste specification is selected, the software automatically creates a
Target 10 specification file for future use.