User's Manual Part 3

♦301♦ MEGAM.O.L.E.® Help System Guide
5.5.7.1. Set Assembly Information
This command allows the user to set assembly information associated with the selected
data run profile.
When setting assembly information, this data will be applied to the currently
selected data run only.
To enter sensor information:
1) On the Assembly-Board menu, click Set Assembly Information.
If a setting is already selected for a data run, the software will prompt the user
to decide if they wish to modify the current data run. Click the Yes command
button to continue or No to quit the command.
2) Enter an assembly part number.