User's Manual Part 3

♦287♦ MEGAM.O.L.E.® Help System Guide
5.5.5.4. Set Recording Parameters
The Set Recording Parameters command configures how the M.O.L.E. profiler records
data during a data run.
The Start and Stop Parameters are optional settings and do not require
configuration.
If an instrument is not currently connected to the computer, the default
Demonstration MEGAM.O.L.E.® profiler will be displayed.
To set recording parameters:
1) Connect the M.O.L.E. to the PC. Refer to Basics>Setup>Communications
Setup for more information.
2) On the M.O.L.E. menu, click Set Recording Parameters.
3) In the Instrument Name text box, type a company, operator, or M.O.L.E. Profiler
name.
4) Enter the Recording interval at which the M.O.L.E. profiler records data points.