User's Manual Part 3

♦285♦ MEGAM.O.L.E.® Help System Guide
5.5.5.3. Instrument Status
This command displays the health of the M.O.L.E. Profiler such as battery charge,
internal temperature, thermocouple temperatures. This command also allows the user
to display items that will prevent the user from completing a successful data run.
To display the instrument status:
1) On the M.O.L.E. menu, click Instrument Status and the dialog box appears.
If an instrument is not currently connected to the computer, the default
Demonstration MEGAM.O.L.E.® profiler will be displayed.
If the I/O module is not connected to the MEGAM.O.L.E.® Profiler, the software
will display a warning message that the instrument is not communicating.
2) Click the Show Critical command button to filter the acceptable status items and
only display critical problems that may prevent the user from completing a data
run. In the example, the internal temperature reported is higher than the
recommended operating specification.