User's Manual Part 3

♦281♦ MEGAM.O.L.E.® Help System Guide
5.5.5.2. Read Instrument
The Download Data workflow is a wizard that starts a new profile (data run) by
downloading the M.O.L.E. Profiler. Once the data run is downloaded, the user can
then choose to apply Machine (Oven), Assembly (Board) and Process (Paste)
information.
The Download Data workflow:
1) Connect the M.O.L.E. to the PC. Refer to Basics>Setup>Communications
Setup for more information.
2) On the M.O.L.E. menu, click Read Instrument.
When navigating through the wizard, the step list on the left uses a color key
to inform the user of the current step, steps that have been completed and
remaining steps.
Current Completed Remaining
3) Select the desired instrument from the list box to make active. If there are none
listed, click the Scan for Instruments command button to detect all available
instruments.
MAP software allows multiple instruments to be connected to a computer at
one time. Selecting the Scan for Instruments command button will detect all
instruments and display them in the list. If no instrument is detected, the
default Demonstration MEGAM.O.L.E.® profiler is displayed.