User's Manual Part 3

MEGAM.O.L.E.® Help System Guide ♦280♦
5.5.5.1. Select Instrument
The Select Instrument command allows the user to select an available M.O.L.E. Profiler
to make active so it can interface with the software.
To select an instrument:
1) Connect the M.O.L.E. to the PC. Refer to Basics>Setup>Communications
Setup for more information.
2) On the M.O.L.E. menu, click the Select Instrument command.
3) Select the desired instrument from the list box. If there are none listed, click the
Scan for Instruments command button to detect all available instruments.
MAP software allows multiple instruments to be connected to a computer at
one time. Selecting the Scan for Instruments command button will detect all
instruments and display them in the list. If no instrument is detected, the
default Demonstration MEGAM.O.L.E.® profiler is displayed.
4) Click the OK command button to accept or Cancel to quit the command.