User's Manual Part 3

♦273♦ MEGAM.O.L.E.® Help System Guide
5.5.4.1. Get Started
This command activates the Get Started dialog box for access to the New (Start)
command.
To activate the Get Started dialog box:
1) On the Wizards menu, click Get Started and a dialog box appears with the New
(Start) command button.
5.5.4.2. Setup Instrument
This Wizard guides the user through a typical process on how to set a M.O.L.E. Profiler
up for performing a data run.
1) Connect the M.O.L.E. to the PC. Refer to Basics>Setup>Communications
Setup for more information.
2) On the Wizards menu, click Setup Instrument and the workflow wizard
appears.
When navigating through the wizard, the step list on the left uses a color key
to inform the user of the current step, steps that have been completed and
remaining steps.
Current Completed Remaining
3) Select the desired instrument from the list box. If there is none listed, select the
Scan for Instruments command button to detect all connected instruments.
MAP software allows multiple instruments to be connected to a computer at
one time. Selecting the Scan for Instruments command button will detect all
instruments and display them in the list. If no instrument is detected, the
default Demonstration MEGAM.O.L.E.® profiler is displayed.