User's Manual Part 3

MEGAM.O.L.E.® Help System Guide ♦358♦
Protective plug construction
If fewer than four nano connectors (20 sensors) are used in your application, a
protective plug may be used for each of the unused I/O Module channel banks.
The following items will be needed to construct a Thermocouple:
• 1 nano thermocouple housing and 2 hardware screws.
• Phillips (Crosshead) screwdriver
Construct a protective plug as follows:
1) Carefully place the two halves of the thermocouple housing together.
2) Replace the 2 hardware screws.