User's Manual Part 2

MEGAM.O.L.E.® Help System Guide ♦204♦
10) When finished, click the OK command button to accept or Cancel to return
without making any changes.
11) Click the Next command button.
12) Select your process specification. The user can select a Paste from the database
or a pre-defined Target 10 file. Then select a Profile Type (Ramp-Soak-Spike or
Ramp-to-Spike). If your Paste does not appear in the database list click the New
command button to create a new machine. Refer to topic
Software>Menus>Process>Create new Paste for more information.
When a paste specification is selected, the software automatically creates a
Target 10 specification file for future use.