Manualshelf

User's Manual Part 2

ManualsBrandsElectronic Controls Design ManualsElectronicsMEGA M.O.L.E.
12345678910
MEGAM.O.L.E.® Help System Guide ♦134♦
5.4.3.4. SPC Flags
SPC Flags allow the user to flag parameters so they are displayed on the SPC Page
Tab. For each Parameter listed after the User defined Parameters, there is an SPC
Flag. To display the parameter data in an X-Bar and R-Chart format, select the desired
SPC Flag. Refer to topic Software>Page Tabs>SPC Page Tab for more information.