User's Manual Part 1

MEGAM.O.L.E.® Help System Guide 50
It is highly recommended that protective gloves are used when retrieving the
thermal barrier from the oven and when opening the thermal barrier.
4) As the test assembly and M.O.L.E. Profiler emerge from the machine, carry the
test assembly with sensors attached and the M.O.L.E. Profiler in the Thermal
barrier to a table or flat surface.
If a sensor is removed before the M.O.L.E. Profiler has stopped collecting data,
the data for that channel might become distorted.
5) Open the Thermal barrier and if the Activity LED is still flashing this means the
M.O.L.E. Profiler is still recording and it must be stopped.
6) Remove the M.O.L.E. Profiler from the Thermal barrier. Handle it carefully, as the
case may still be warm.
7) Disconnect the sensors from the M.O.L.E. Profiler and place it near the
computer.