User's Manual Part 1

21 MEGAM.O.L.E.® Help System Guide
Features/functions:
 Data/Charging Port: This port is located on the backside of the battery. This is
used to transfer data through the USB computer Interface cable to the computer.
It is also used to charge the battery using the supplied transformer.
When the Power Pack battery is connected to a powered computer USB
port, the power from the USB port will charge the Power Pack battery.
 Activity indicator: This LED illuminates when the Power Pack battery is
charging.
 Interface Connector: This connector interfaces with the rear interface connector
on the Main module. It is where the power and signal data is transferred.
 Alignment Pins: These pins are used to secure the Power Pack battery to the
Main Module. These are also keyed so it properly aligns with the Main module.