User's Manual Part 1

MEGAM.O.L.E.® Help System Guide 18
Features/functions:
 Buttons: ON/OFF, Record & OK.
Button: Action:
ON/OFF Turns Main module "ON/OFF".
Record Starts/Stops Main module recording data.
OK Invokes "OK" process where the last
recorded profile is compared to pre-
configured criteria resulting in a "Pass" or
"Fail" mode.
 Activity indicators: These are LED's that indicate what state the M.O.L.E.
Profiler is in. Refer to the illustration and table below.
LED: Action: LED Color
ON/OFF Indicates Main
module is
"ON" and idle
Green
(Flashing)
Record Indicates Main
module is
recording data
Green
(Flashing)
OK Indicates
recorded
profile passes
pre-configured
criteria using
the Target 10-
OK tab in the
software.
Green - Pass
(Solid)
Red - Fail
(Solid)
Temp(erature) Indicates if the
internal
temperature is
at or above a
certain
threshold.
Red (Slow
Flash) >40°C
Red (Solid)
>85°C
Battery Indicates
when the
Power Pack
battery voltage
is low
Red (Slow
Flash) <3.0V
RF (Radio
Frequency)
Indicates
when main
module and
receiver is
transferring
data
Blue